Mjjc-eu Dimmer de Parede para Única Cor Led Strip Smart Dimmer Tela do Painel de Toque Luz Regulável Controle Remoto rf 12v dc 24v 36v 5v 2.4g

Opção de Compra e tempo de entrega

1. Mjjc-eu Dimmer de Parede para Única Cor

Features of V1 LED Dimmer:

? 4096 levels 0-100% dimming smoothly without any flash.
? Match with our 2.4G single zone or multiple zone dimming remote control.
? One RF controller accept up to 10 remote control.
? Auto-transmitting function: Controller automatically transmit signal to another controller with 30m control distance.
? Synchronize on multiple number of controllers.
? Connect with external push switch to achieve on/off and 0-100% dimming function.
? Over-heat / Over-load / Short circuit protection, recover automatically.

Technical Parameters:

? Input Voltage: 5-36V DC
? Input Voltage: 5-36V DC
? Output Current: 8A 1Channel
? Input signal: RF 2.4GHz + Push Dimmer
? Dimming range: 0 -100%
? PWM Frequency: 500Hz (default)

Features of Touch Panel Remote:

(MJJCLED-T11-1/T11-K)
? Ultra sensitive high strength glass touch e rotary panel with touch color slide in the middle and backlighting.
? Smooth and accurate color adjustment by touching the color slide.
? Touch keys with LED indicator.
? White e Black glass panel available.

Match Remote Control:

End user must be pair the remote to the receiver before using,the steps as follows:

*** Match:
Turn on light, turn off, immediately press the On/Off key of the panel for 5s, then press any zone key of the RF remote within 5s.

The LED indicator fast flash 3 times
means match is successful.

*** Delete:
Turn on light, turn off, immediately press the On/Off key of the panel for 10s to delete all match,

The LED indicator fast flash 6 times
means all matched remotes were deleted.

Push Dimming Switch:

You can also add a push switch to realize dimming.

The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs.

? Short press:
Turn on or off light.
? Long press (1-6s):
Press and hold to step-less dimming,
With every other long press, the light level goes to the opposite direction.
? Dimming memory:
Light returns to the previous dimming level when switched off and on again, even at power failure.
? Synchronization:
If more than one controller are connected to the same push switch, do a long press for more than 10s,then the system is synchronized and all lights in the group dim up to 100%.

This means there is no need for any additional synchrony wire in larger installations.

We recommend the number of controllers connected to a push switch does not exceed 25 pieces,

The maximum length of the wires from push to controller should be no more than 20 meters.